Problem Logging my Character in: Client Disconnected (not active in process)

[techguy84]

Try changing this

<host>192.168.10.10</host>

back to 127.0.0.1

You dont have to reference the host machines IP for the database to connect. I dont know if this will help fix your issues though.

[Darkonig]

Actually, looking through your world server log I do not see a problem. The client disconnected (Not in active process) simply means that the world server handed off the client to the zone server.

What sort of problem are you actually having?

[Carnage_ou812]

Computer 1: Hosts Emulation server. This connects fine.
Computer 2: Connects through to character select but drops after that (can't actually log into a zone.
Computer 3: Connects fine.

Because of the 3rd computer install going okay, I am looking heavily at my network packets to determine if there is something wrong with computer 2. With computer 3 running on the network with minilogin, that definitely puts it over to client-side issues.

Thanks for all of the PMs as well as the follow-up posts. You guys are pretty good about supporting this community.

I will post with my vpn project results later.

[Carnage_ou812]

Moral to the story:

Leave nothing to chance. Make sure you verify the components of your clients before you start any guide.

The memory had been swapped out on the offending client that would not connect. The program was loading in small chunks while paging. Very messy.