Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Windows Servers
Reload this Page Your assistance is required please

Support::Windows Servers Support forum for Windows EQEMu users.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-30-2008, 11:02 PM
trevius's Avatar
trevius
Developer
  
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default
If he is using the Public Login Server, then he definitely needs the Port Ranges that I mentioned to be forwarded to his server. It will not work otherwise unless he connect his PC directly to the modem without the router in the middle or unless he sets his server as a DMZ in the router config.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #2  
Old 09-30-2008, 11:14 PM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
Quote:
Originally Posted by trevius View Post
If he is using the Public Login Server, then he definitely needs the Port Ranges that I mentioned to be forwarded to his server. It will not work otherwise unless he connect his PC directly to the modem without the router in the middle or unless he sets his server as a DMZ in the router config.

My problem is my modem IS my router. It's an AT&T dsl wireless modem with 4 connections for cat5 and has a built in router. So far it hasn't given me any problems. Hopefully, its just me and not the router/modem screwing me up.
Reply With Quote
  #3  
Old 09-30-2008, 11:49 PM
Sylaei
Hill Giant
  
Join Date: Jan 2007
Posts: 124
Default
Oops, come to think of it I have always setup minilogin first then attempted to setup the public afterward. I guess my ports have already been open.

What server is it, Skizoke? I'll try to login and see what happens.
__________________
Syl

"The significant problems we have cannot be solved at the same level of thinking with which we created them."
Albert Einstein
Reply With Quote
  #4  
Old 10-01-2008, 12:08 AM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
Skizoke Test Server
Reply With Quote
  #5  
Old 10-01-2008, 12:10 AM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
Here is the way my eqemu_config file currently looks:

<?xml version="1.0">
<server>
<world>
<shortname>Skizoke</shortname>
<longname>Skizoke Test Server</longname>

<!-- Only specify these two if you really think you need to. -->
<address>74.185.XX.XX</address>
<localaddress>192.168.1.68</localaddress>

<!-- Loginserver information. -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<!-- <tcp ip="localhost" port="9000" telnet="disable"/> -->

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>******</password>
<db>peq</db>
</database>
</server>
Reply With Quote
  #6  
Old 10-01-2008, 12:24 AM
Sylaei
Hill Giant
  
Join Date: Jan 2007
Posts: 124
Default
Skizoke, This was in my Titanium log file.

Code:
2008-09-30 23:07:33	Networking: Connection Established [1]
2008-09-30 23:08:33	*** WorldAuthenticate.  Error connecting to 74.185.XX.XX:9000 [client:DisconnectReasonConnectFail,server:DisconnectReasonNone]
2008-09-30 23:08:33	
2008-09-30 23:08:33	Networking: Connection Closed [0] with 0 pending bytes.
2008-09-30 23:08:34	*** ERROR: WorldAuthenticate has failed after attempting to connect.
First try commenting these lines in your eqemu_config file:
<address>74.185.XX.XX</address>
<localaddress>192.168.1.68</localaddress>

Second try this, note I don't even have this line in my eqemu_config file:
Try uncommenting this line from your eqemu_config file:
<!-- <tcp ip="localhost" port="9000" telnet="disable"/> -->
__________________
Syl

"The significant problems we have cannot be solved at the same level of thinking with which we created them."
Albert Einstein
Reply With Quote
  #7  
Old 10-01-2008, 12:29 AM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
I made the changes, currently looks like this:

<?xml version="1.0">
<server>
<world>
<shortname>Skizoke</shortname>
<longname>Skizoke Test Server</longname>

<!-- Only specify these two if you really think you need to. -->
<!-- <address></address> -->
<!-- <localaddress></localaddress> -->

<!-- Loginserver information. -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Sets the ip/port for the tcp connections. Both zones and console

(if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>******</password>
<db>peq</db>
</database>
</server>

I don't know how to actually restart the server. I have just been closing the two dos windows. I am just now thinking, maybe changes to my config file are not taking effect if I am not restarting correctly?
Reply With Quote
  #8  
Old 10-01-2008, 12:35 AM
trevius's Avatar
trevius
Developer
  
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default
Ya, you are restarting it correctly for Windows. It should be taking effect.

Try running an "ipconfig /all" from your command prompt and post that here if you don't mind.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #9  
Old 10-01-2008, 01:04 AM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
Quote:
Originally Posted by Sylaei View Post
Skizoke, This was in my Titanium log file.

Code:
2008-09-30 23:07:33	Networking: Connection Established [1]
2008-09-30 23:08:33	*** WorldAuthenticate.  Error connecting to 74.185.XX.XX:9000 [client:DisconnectReasonConnectFail,server:DisconnectReasonNone]
2008-09-30 23:08:33	
2008-09-30 23:08:33	Networking: Connection Closed [0] with 0 pending bytes.
2008-09-30 23:08:34	*** ERROR: WorldAuthenticate has failed after attempting to connect.
First try commenting these lines in your eqemu_config file:
<address>74.185.XX.XX</address>
<localaddress>192.168.1.68</localaddress>

Second try this, note I don't even have this line in my eqemu_config file:
Try uncommenting this line from your eqemu_config file:
<!-- <tcp ip="localhost" port="9000" telnet="disable"/> -->
The titanium log file? Where is it located and what is the exact name?

I see zone logs and debug logs, just not sure which one you are referring to.
Reply With Quote
  #10  
Old 10-01-2008, 01:06 AM
Skizoke
Sarnak
  
Join Date: Sep 2008
Location: Alabama
Posts: 70
Default
Here is a screenshot of the way I forwarded the ports:

Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

   

All times are GMT -4. The time now is 03:40 AM.

EQEmulator - Archive - Top

 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3