Issues with setting zone points

[Neiv]

Hmm . . .doh!

Would someone be so kind as to sort their zone_points table by zone name and copy and paste the "commons" entries here (there should be three or four of them)? And while you're at is, I would probably benefit from the entries of eastkarana, qey2hh1, southkarana, and northkarana. Sorry for the trouble.

[Neiv]

ONLY alter the "target" coordinates.

So if you want to zone from WC to Kithihor- you walking over the "zone out" points. That points is hard coded, if Db entriy for that point is missing - your zonnign will be screwed up - the client will STILL try to zone you SOMEWHERE - but if you messed with those values (as i showed above) - the values in Db will not match with with client hard coding and you will enter into endless zone-loop

now for "target" values- you can put anything you want - so it is posible to have WC zone line zone you to qeynos, as long as you do NOT touch the zone line itself

Okay, I'm still having no luck with this. I tried using this method to zone from the eastern zoneline of qey2hh1 (number 1 zone for qey2hh1 in the zone_points table) to commons (target_zone_id 21), and entering that zoneline stills takes me to North Karana. This is VERY frustrating because it disallows me from piecing my map together. Any suggestions?

[ChaosSlayer]

there are few zone lines which use VERY BROAD zoning line.

for exmaple zoning from West to east COmmons- you prabobly noticed that there are prety mcuh unlimited number of places you can zone from and to betwin these 2 zones.

You can zone by the orc camp, or by the road or by the south wall- etc BUT you arive in the other commosn EXCATLY where you zoned out in the other commons. - in other words the client somehow KNOWS your coordinates where you zoned out and puts them over to naother zone where you zonign in.

SAME thing happenigng betwen West and North Karana - the client need to keep some sort of a special track to see that if zoned by the road or nexr the river - and then put you by the road or by the river or any other of million points - real coordinates transisition i call it.
Same thing when zoning from North Qeynos to Qeynos Hills

I am prety sure those specific zone lines cannot be altered neither or at least won't be a trivial thing to do. I decided myself NOT to mess with them.

HOWEVER I have succesefuly made it than for exmaple you can zone from Unrest to Felwithe B, on StromHeaven server you can also see how you can zone from CrushBone to nexus - that is done as I mentioend with altering TARGET zone/coordinates

so try to alter zoning with something what naturaly has NARROW passage.
For starters connect Crushbone to Unrest for exmaple =)

[Neiv]

Yeah, I figured out the broad zone lines are going to be near impossible to change. And I have since my last post successfully changed quite a few narrow zonelines. I have also learned to leave the origin zone points alone and just change the target zone points in any given row. However, there are some target zone points that still do not respond no matter what (e.g., the zoneline from Eastkarana to Beholder, narrow zone points both, will not let me change the target from Beholder to something else without getting caught in an endless loop to Beholder). For those cases I have set up an invisible NPC that catches players entering the proximity and zones them to the right target zone via quest::movepc(zoneid,x,y,z) just before they reach the zoneline.

[ChaosSlayer]

dang I had plans for that zone point myself
thanks for posting this

[Neiv]

The zoneline from West Commons to Kithicor gives me similar grief when I try to change the target to qey2hh1 (the zone point is the tunnel between qeynos hills and West Karana--both zonelines are "tunnel" zonepoints, so it shouldn't be an issue, but it is). It's not a pervasive problem (I've only encountered two or three examples of it), but it there. You may get a different result when you try it.