Problem connection Tried all angles [Help Needed]

[seridium]

Bump

Anyone else own a D link router I have unlocked all ports 1024 -6000 7000
9000 and it seems still no work?

[Andrew80k]

Hmmm. I don't see any errors in the log file snip that you showed. Looks like you are connecting to the public LoginServer just fine.

As for ports you should open 7000-7100 for your zones, unless you start more than 100 zones, then you will need to open at least one for each.

Do you have a LoginServer.ini file? If so what does it look like?

You also need to change localhost back to 127.0.0.1. Don't change that unless you know exactly what you are doing and the affect it will have on all the processes you have running.

Look in the rule_values table to check where you are trying to login to from your server. I don't remember the rule name off hand but if you look through the list it should pop out. make sure the rule value is set to public. If you have used minilogin in the past you may have changed that, if not it should be public by default. My guess is it's not a router issue.

[seridium]

Now when you say change the local host back would that be in my Host file ?


I will try opening ports 7000 - 7100

I have contacted my ISP and they say all my ports are open on there end, on my end with my shityy d-link router and its crappy settings I have manually added ports 9000 TCP/UDP 7000 7001 7002 7003 etc one at a time unlocked tcp/udp

Then i unlocked through program porting ports 1024 - 6000 and when I load up the website http://www.canyouseeme.org/ and check port 9000 with the server off it says blocked as soon as I run the server it says success port is open but with the server on the rest of teh ports 1024, 6000, 7000 all say no success so i am getting very frustrated here so I figured my router was malfunctioned so I reset the whole router and reconfigured it all over again and still no connect for my friend it connects to login server connects to world I can play on it when he connects still nothing in World.exe and shoots him to the login screen.

So then I reset the router again unlocked teh ports through router firewall setting I unlocked them through program settings and also through virtual server I even set up the no-ip config through my routers DNS service so this is totally making me mad its cool playing on my server but all alone doing it is gay.


Would it be all because of my host file where i added
192.168.0.100 localhost

127.0.0.1 localhost
127.0.0.1 dragonnest.no-ip.info



Note that the "dragonnest.no-ip.info" is what you need to replace with what yours.
Also after doing this use the dns address for your worldserver address as well as you zoneserver address. Replace all the 127.0.0.1 with your DNS address. After doing this both people from outside your router as well as yourself will be able to log into server.

*NOTE by Striat- Just to try to make things a little more clear, you would replace the 127.0.0.1 with what you get from going to start>run>cmd and typing in ipconfig. Doing so will give you IP address, Subnet Mask, etc. You want the number next to IP address, such as in my case 192.168.xxx.xxx. So, your hosts file would look more like this at the end:

127.0.0.1 localhost
192.168.xxx.xxx YourNoIPName.no-ip.info

you see where it says "Replace all the 127.0.0.1 with your DNS address. After doing this bothe people from outside your router as well as yourself will be able to log into server."


So wouldnt it look like this then after 192.168.0.1 localhost
192.168.0.1 myaccount.no-ip.info


But you are saying to make it look like this
127.0.0.1 localhost
192.168.0.1 myaccount.no-ip.info


would this be my whole problem having the 192.168.0.1 where i should have the 127.0.0.1

[seridium]

Now for this loginserver.ini file lets get to the bottom of this...

I run 0.7.0 server
I cannot find a loginserver.ini with this version so what is there instead of this.
If I could find that file everyone speaks of I might be able to figure something else out But I HAVE NO IDEA WHERE THE LOGINSERVER.INI FILE IS.
My knowledge tells me with this new newer server 0.7.0 and Peqdb_1129Rev291.sql is it in these files and please I don't need post's telling me im dumb and clearly dont know what im talking about I just need advice help and just need to be pointed in teh right direction I learn way better from being told or having at least an example of what I am supposed to do, when It comes to loginserver.ini I cant find any info other than people asking em if I checked the loginserver.ini where and how do i find this so called file, is it a different file with version 0.7.0?
Please help

[Andrew80k]

The LoginServer.ini file should be in your EQEmu directory.

and it should look like this:

also your server loginserver.ini should look like

[LoginServer]
loginserver=eqemulator.net
loginport=5994
worldname=
worldaddress=name.no-ip.org
locked=true
account=
password=
#account=
#password=

As for the localhost thing...

in your system hosts file your localhost should be set to 127.0.0.1. You can change your settings in your EQEmu file to whatever you want and the instructions are fine for that.

Have you tried just turning the firewall off to make sure that's not giving you problems? I'm not advocating leaving it off, but once you get connected from the outside then just add it back in and open the ports. That way you eliminate some of the variables here.

[Andrew80k]

I think that port in the ini file above is supposed to be 5998 though, not 5994. I just saw that. I copied and pasted it and didn't notice it until after my edit timer had passed...

[seridium]

I have no LoginServer.ini file
I do have a blank log.ini file
I also have a eqemu_config.xml file which has the following in it.

<?xml version="1.0">
<server>
<world>
<shortname>beta0.1</shortname>
<longname>Serverbeta0.1</longname>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>225458756</key>

<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>account.no-ip.org</address> -->
<!-- <localaddress>192.168.0.100</localaddress> -->

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="account.no-ip.org" port="9000" telnet="enable"/>

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />

</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>123456</password>
<db>peq</db>
</database>
</server>

Should there be one?
Is there something I can edit in the peq_db tables?

I checked my host file and I did have it as
127.0.0.1 localhost
192.168.0.100 for account.no-ip.org