server file help

[nosfentora]

did you have 'static' in all *3* places? the Launcher table, the Launcher_Zones table, and your .bat file (start eqlaunch.exe static)?

looking back at your posts, your .bat file has
start eqlaunch.exe zone

if you changed the Launcher and Launcher_Zones table to something else, then it definitely wouldn't find them.

what you pass eqlaunch as an argument will be the name of the launcher it looks for in the Launcher table.

as far as too may connections, that a config setting for mysql that you'd have to change.

[nosfentora]

also, take a look in your eqemu_config.xml file under

    <zones>
        <defaultstatus>0</defaultstatus>

        <!-- Sets port range for world to use to auto configure zones -->
        <ports low="7000" high="7110"/>
    </zones>

the default high port is 7100 - you might need to up that a little.

i ran 100 static zones and 5 dynamics and they all loaded ok.

[Nightraven74]

last problem solved with editing the mysql's config file to allow more than 100 conections =p zone servers use 1 connection per zone static or dynamic so the default setting of 100 was to low =p thanks for all the help guys now for the gruling task of adding more zone entry's lol