Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Windows Servers

Support::Windows Servers Support forum for Windows EQEMu users.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-12-2009, 04:20 PM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

Well, LAN setups can sometimes be harder to configure properly than Public ones. The hard part is this part of your config:

Code:
<!-- Only specify these two if you really think you need to. -->
<address>localhost</address>
<localaddress>192.168.1.109</localaddress>

On a public server, you wouldn't even set that at all, you would leave that section commented out.

Here is what I set mine to for my test LAN server:

Code:
	<!-- Only specify these two if you really think you need to. -->
	<address>192.168.1.102</address>
	<localaddress>127.0.0.1</localaddress>
Mine probably isn't standard though, because I run my server on VMWare in Linux and it connects to my main PC running windows where the minilogin is running. Someone more familiar with minilogin setups is probably going to need to help you with that.

And, if the repack setup has some different special launcher, then that is probably why you are having a problem. I see a ton of zone launching in your server log and you don't have hardly any configured in your launcher_zones table. You need to put each zone you are launching in your launcher zones table to match your launcher program, or the server won't know where to send you. Maybe try setting them all to dynamics and remove all of the static stuff you have set until you can get that working. Your tables and launcher program have to match perfectly, which is probably your main issue atm.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #2  
Old 08-09-2009, 09:31 PM
Angelox
AX Classic Developer
 
Join Date: May 2006
Location: filler
Posts: 2,049
Default

Just for the record, AX Repack has always been compatible with SoF, currently up to date with all the latest SoF code.

Since AX repack is really intended for play at home (EQOFFLINE), It has a minimal amount of zones loaded, which is 3 dynamic and the optional 5 ship zones. I'm able to play fine alone or with a friend like this.

I've seen where mounting many zones (static/dynamic) consumes more resources, so this way, you're able to play even with a slower/older machine.

If you look in tables launcher and launcher_zones, you'll see where there are over 100 zones available for static (split up 13 ways so you can choose), and up to 15 dynamic. You just have to set it up in your startup file. But be aware 100+ static zones are intended for around 100+ players and this will require more resources in bandwidth, CPU usage, etc.

Last edited by Angelox; 08-10-2009 at 05:35 AM..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 05:03 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3