EQemu Login Server

[norsan]

i meant for the worldserver i set it up exactly like i would connecting to anything but minilogin eg the official ls if you put all the right info in the db and follow this thread it will work perfectly if not then its a porting issue with eithr a firewall router or your isp as a whole i have no idea what to tell you but all i did was follow the normal emu setup guide and the ls was a breeze to setup without any guide took me all of 10 minutes start to finish. lemme break it down

1 source the ls sql files
2 make sure the ini opcode and appropriate eqemuauthcrypto.dll files are in the same folder as the exe
3 make a world entry for your worldserver in the tblworldserverregistration table
3 make serveradmin entry for same worldserver( Eg the username and password you put into the loginservr block of the eqemu_config.xml file for the emulator)
4 make account in loginserveraccounts table following the insert for example contained in tis thread and the sql file for the ls itself use a pass of 6 characters

fire it all up as normal and if your porting and ip settins are correct for the worldserver whala bobs your uncle

[nosfentora]

logging into my server remotely via the public login works fine, so my ports should be good to go.

i setup the login server prior to the guide (which is why i didn't see the 'guide' post.). i set up everything again, exactly according to the guide, (but used no-ip.org instead of dyndns). i can log in, get to server select, see my server and bam - error 1017.

somewhere along the line the login server is not communicating with the emu. that's my hangup.

[nosfentora]

FYI the ports I have forwarded are
5996-6000,6999-7101,8999-9101,7776-8000 TCP and UDP