SOD client and MiniLogin "login" solution

Zandig · #1 05-07-2010, 04:25 PM

In the 'variables' table in your database is your "LoginType" set to the value of "MiniLogin" (without the quotes)?

Zandig · #2 05-07-2010, 04:36 PM

Your config files look almost identical to mine.

However in your 'eqemu_config.xml' you have this section:

Code:

<?xml version="1.0"?>
<server>
<world>

<shortname>walkworld</shortname>
<longname>walks EQ world of madness</longname>


<!-- address has to be specified for minilogin to work -->
<address>localhost</address>
<localaddress>localhost</localaddress>

<!-- Loginserver information. -->
<loginserver>
<host>localhost</host>
<port>5999</port>
<account></account>
<password></password>
</loginserver>

I have it this way:

Code:

<?xml version="1.0">
<server>
        <world>
                <shortname>minilogin</shortname>
                <longname>My Minilogin</longname>
                
                <!-- Only specify these two if you really think you need to. -->
		<address>127.0.0.1</address>
		<localaddress>127.0.0.1</localaddress>
		
		<!-- Loginserver information.  -->
        <loginserver>
		<host>127.0.0.1</host>
		<port>5999</port>
		<account></account>
		<password></password>
        </loginserver>

**GeorgeS** · #3 05-07-2010, 09:02 PM

In my case I was running SOF and emy ver 1316 runs fine. Switching to SOD also does not work. Password rejected after the password entry in the client.

So there's more to running SOD than appears - especially if SOF works great.

...still waiting to get SOD working as well
If there's another minilogin - anyone have the compiled version?

GeorgeS

**trevius** · #4 05-07-2010, 09:10 PM

GeorgeS, you can always setup the Open Source Login Server from here if you wanted:

http://code.google.com/p/projecteqemu/downloads/list

It isn't too hard to set up and once you do, it works much better than MiniLogin. As far as I know, there is only 1 version of MiniLogin binaries around, so if that isn't working for you for SoD, maybe something else is wrong with it. I haven't tried the changes that Zandig suggested in this thread on for MiniLogin, because I don't use it anymore, just the open source one.

walk · #5 05-07-2010, 10:28 PM

Quote:

Originally Posted by Zandig

Code:

<?xml version="1.0">
<server>
        <world>
                <shortname>minilogin</shortname>
                <longname>My Minilogin</longname>
                
                <!-- Only specify these two if you really think you need to. -->
		<address>127.0.0.1</address>
		<localaddress>127.0.0.1</localaddress>
		
		<!-- Loginserver information.  -->
        <loginserver>
		<host>127.0.0.1</host>
		<port>5999</port>
		<account></account>
		<password></password>
        </loginserver>

So you have the 127... ip instead of "localhost" - I just tried that, no help.. It doesn't seem to be a problem with the connections.. I am GETTING connections, it's just that the client hangs up.

I really don't think the Steam SoD client works with Minilogin.. at least not the version I have (6.2)

walk · #6 05-07-2010, 10:55 PM

Quote:

Originally Posted by Zandig

In the 'variables' table in your database is your "LoginType" set to the value of "MiniLogin" (without the quotes)?

I don't know.. how do I check this? I'm a total mysql noob.. I did follow the guide and set it up correctly as far as I can tell.. If you look at the screenshots Minilogin says "Server mode: Minilogin" and World.exe says something similar "[WORLD_LS] Setting World to MiniLogin Server type"...