Thanks for the info Uleat.
I seriously can’t figure out what I’m doing wrong. SO, I’ll post my step by step process to see if you guys can pick up on my error(s). You know how it is, after hours of staring at something; it helps to get some different eyes to look at your work.
So to start, I’m using Kavren’s guide found here:
http://www.eqemulator.org/forums/showthread.php?t=31783
Phase 1: Install and Gather Starting Supplies:
I’m using Perl 5.12 (32 bit), MySQL 5.1.54 (32 bit), a demo version of Navicat, TortoiseSVN 1.7.6 (64 bit), Microsoft Visual C++ 2008, Zlib.
I installed all of the above programs first.
Next I created a folder called “EQEmuSVNFiles” in my C:\ drive (all of the file locations I will use going forward in this post will be based on exactly where Kavren says to do it in his guide).
I then created a subfolder in that folder called “EQEmu”.
I then right clicked on EQEmu and went to SVN checkout with
http://projecteqemu.googlecode.com/svn/
Next I created a subfolder called DB and did an SVN checkout with
http://projecteqdb.googlecode.com/svn/trunk
Next, Kavren says to install Perl 5.10. I previously installed version 5.12 since I couldn’t seem to find an install version of 5.10 anywhere online. Other posts have mentioned that version 5.12 works with Microsoft Visual C++2008, so I’m going with that.
Next I installed MySQL 5.1.54 (I tried using 5.08 like he mentions in the guide, but I could never get the service to start at the end of the config). When the option came to configure, I chose detailed configuration>>server machine>>multifunctional database>>online transactional processing (OLTP)>>Unchecked Enable Strict Mode but enabled TCP/IP Networking (port 3306)>>best support for multilingualism>>checked both install as windows service and include bin directory windows PATH>> then put in a new password and hit execute.
I then started Microsoft Visual C++ 2008 and made sure I had the appropriate directories included:
Include files: C:\mysql\include
Include files: C:\perl\lib\CORE
Include files: C:\zlib\include
Library files: C:\mysql\lib\opt
Library files: C:\perl\lib\CORE
Library files: C:\zlib\lib
Phase 2: Compile
In Microsoft Visual C++ 2008 I went to file>>open>>project/solution and browsed to C:\EQEmuSVNFiles\EQEmu\trunk\EQEmuServer and selected server.sln.
I then unloaded the queryserv so that I had only the 5 projects needed.
Next I hit build/clean solution and got 5 succeeded, 0 failed.
Then I went to the configuration manager and selected releasebots.
I then went into eqwparser.cpp as well as embperl.cpp and changed both instances of 510 to 512 (since I’m using version 5.12 of Perl).
Finally I went to build/build solution. After, I got the message of 5 succeeded 0 failed.
I then created a folder in my C:\ drive called EQEmu
I then copied the following files into my EQEmu folder:
Changelog.txt
Chatserver.exe, EMuShareMem.dll, World.exe, Zone.exe from the build directory.
Eqlaunch.exe from the EQlaunch\release directory (Interesting thing here: The file was named eqlaunch.exe.intermediate.manifest so I deleted everything behind the .exe hoping this is right!)
mail_opcodes.conf, opcodes.conf, patch_6.2.conf, patch_Anniversary.conf, patch_SoD.conf, patch_SoF.conf, patch_Titanium.conf from the Utils directory (It also asked to transfer patch_live.conf but there was NO file named this. Also what about patch_HoT.conf, patch_Underfoot.conf, and patch_VoA.conf? I know these expansions are newer than this guide. Will it mess me up if I transfer these over? What if I don’t? I didn’t because I’m going literally step by step on the guide).
I then copied ALL of the files from the default folder into my EQEmu folder.
Phase 3: Setup Databases, Adjust Server Settings and Gather More Files
Now time to source in my database. This is where I’m not sure if I did it exactly right or not. In the guide he talks about rev774. Obviously when I did it we were on rev2133.
I then navigated to C:\EQEmuSVNFiles\DB\peqdatabase and unzipped peqdb_2133.sql into the same folder.
I opened Navicat and made a new connection. I then double clicked on the connection, right clicked on it and made a new database called PEQ.
Next I opened a command prompt and navigated to the above mentioned folder.
I then ran these commands (replacing username/password with my info):
mysql -uUSERNAME -pPASSWORD PEQ < peqdb_Rev2133.sql
mysql -uUSERNAME -pPASSWORD PEQ < load_player.sql
Next Kavren says it’s time to install EQEmuLoginServer:
I extracted and copied EQEmuLoginServer.exe into my C:\EQEmu folder (NOTE: He did NOT say to copy anything else from the zip, so I didn’t).
He then says to navigate to C:\EQEmuSVNFiles\EQEmu\trunk\EQEmuServer\EQEmuLogi nServer\login_util and copy the eqemulogin.ini and login_opcodes.conf to your server folder (C:\EQEmu). The problem is, there is NO eqemulogin.ini so I copied login.ini. Please let me know if this is wrong. I’m following this guide as literal as I can.
I then navigated to C:\EQEmuSVNFiles\EQEmu\trunk\EQEmuServer\EQEmuLogi nServer\login_util\ms\debug and copied EQEmuAuthCrypto.dll to my server folder (C:\EQEmu)
Next was time to setup PEQLoginDB and Logins:
He says to right click on my connection in Navicat and create a new database called PEQLoginDB. I did that next.
Next I opened a command prompt, navigated to C:\EQEmuSVNFiles\EQEmu\trunk\EQEmuServer\EQEmuLogi nServer\login_util and ran the following command:
mysql -uUSERNAME -pPASSWORD PEQLoginDB < EQEmuLoginServerDBInstall.sql (again replacing username/password with the one I had chosen for my database).
I then went into tblLoginServerAccounts and set user/pw to Admin/Password. He says to change 127.0.0.1 to the p address of the client machine I will be playing on. Does this mean the 192.168.1.xx? That’s what I changed it to.
Next I went into tblworldserverregistration and made the changes he suggested to make in there.
The next thing the guide says to do is to edit the eqemu_config.xml. Below is what my file looked like after I made the suggested changes:
Code:
<?xml version="1.0">
<server>
<world>
<shortname>Jermanfu</shortname>
<longname>World of Jermanfu</longname>
<!-- Only specify these two if you really think you need to. (read: You don't) -->
<address>192.168.1.50</address>
<localaddress>192.168.1.50</localaddress>
<!-- Loginserver information. Defaults shown -->
<loginserver>
<host>192.168.1.50</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>
<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->
<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>
<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>
<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>
<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>192.168.1.50</host>
<port>7778</port>
</chatserver>
<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>192.168.1.50</host>
<port>7779</port>
</mailserver>
<zones>
<defaultstatus>20</defaultstatus>
<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7100"/>
</zones>
<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>6harrier8z</password>
<db>peq</db>
</database>
<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe or ./zone</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
</launcher>
<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>
I then opened up eqemulogin.ini ( I assume since there was no file by that name I was to edit login.ini):
This is where things differ, his eqemulogin.ini is a bit different from the login.ini. From what I gathered from other posts, I made mine look like this:
[database]
host = localhost
port = 3306
db = PEQLoginDB
user = root
password = 6harrier8z
subsystem = MySQL
[options]
unregistered_allowed = TRUE
reject_duplicate_servers = FALSE
trace = TRUE
world_trace = FALSE
dump_packets_in = TRUE
dump_packets_out = TRUE
listen_port = 5998
local_network = 192.168.1.
[security]
plugin = EQEmuAuthCrypto
mode = 5
[Titanium]
port = 5998
opcodes = login_opcodes.conf
[SoD]
port = 5999
opcodes = login_opcodes_sod.conf
[schema]
account_table = tblLoginServerAccounts
world_registration_table = tblWorldServerRegistration
world_admin_registration_table = tblServerAdminRegistration
world_server_type_table = tblServerListType
Next I setup my maps and Quest SVN Folders:
I went to my EQEmu folder and did an SVN checkout on the maps folder using this link:
http://eqemumaps.googlecode.com/svn/trunk/Maps
Next I did the same thing with my quest folder using this link:
http://projecteqquests.googlecode.com/svn/trunk/quests
I then copied the files from the quests\plugins folder to the EQEmu\plugins folder.
I then copied spells_en.txt and spells_us.txt from my Titanium EQ folder to the EQEmu parent folder.
I then made a batch file which says exactly this:
@echo off
Echo Starting EQEmuLoginServer
cd C:\eqemu
start eqemuloginserver.exe
echo
echo
cd C:\eqemu
start world.exe
echo waiting a bit for world to finish loading...
echo.
echo.
ping -n 10 127.0.0.1 > nul
echo starting zone
start eqlaunch.exe zone
exit
When I run start.bat I get an error that says this: "Unsupported 16 bit application. This program or feature "\??\C:\EQEmu\eqlaunch.exe cannot start or run due to incompatibility with 64-bit versions of Windows."
Well I'm omw to bed. Another LONG day of messing with this lol. But I am a patient man. I guess I have to be with all the mistakes I make. Anyway, Uleat or anyone else, if you guys can find my mistakes....PLEASE let me know what I need to change. Thanks!
Hybrid Mode
