Akk-stack docker container

[Freejack]

Having an issue with make install after setting environment and network.

Use 'docker scan' to run Snyk tests against images to find vulnerabilities and learn how to fix them
make up detached
COMPOSE_HTTP_TIMEOUT=1000 docker-compose up -d eqemu-server mariadb
[+] Running 0/2
⠿ Container peq-test-server-eqemu-server-1 Starting 0.4s
⠿ Container peq-test-server-mariadb-1 Starting 0.4s
Error response from daemon: driver failed programming external connectivity on endpoint peq-test-server-mariadb-1 (69754616aebae5a2ca2dd5da5ef0af4b6e49575d9f2ef3324 2a833d0d20e4fd1): Error starting userland proxy: listen tcp4 10.12.16.8:3307: bind: cannot assign requested address
make[1]: *** [Makefile:191: up] Error 1
make: *** [Makefile:96: install] Error 2

I changed the port so I can run this as a test. No matter what I set the ip at it tells me it can not assign it.

[Freejack]

Got it all figured out had a port stuck that was not even in use. Killed the pid and off and running.

PEQ Database is taking forever to download though.

[Freejack]

Ok got it up and running and can access everything except the peq editor webpage. I have re installed it 3 times and everytime I can not access the peq editor page.

Anyone else had this issue?

[Akkadius]

Originally Posted by Freejack

Ok got it up and running and can access everything except the peq editor webpage. I have re installed it 3 times and everytime I can not access the peq editor page.

Anyone else had this issue?

Need to do a little bit more to initialize the PEQ editor

In the workspace container run `make init-peq-editor`

Afterwards on the host run `docker-compose up -d peq-editor`

[Freejack]

Originally Posted by Akkadius

Need to do a little bit more to initialize the PEQ editor

In the workspace container run `make init-peq-editor`

Afterwards on the host run `docker-compose up -d peq-editor`

Thank you and hopefully I have a roadmap to pull the existing data from my Linux install into the container install.