Go Back   EQEmulator Home > EQEmulator Forums > Archives > Archive::Support > Archive::Windows Servers

Archive::Windows Servers Archive area for Windows Servers's posts that were moved here after an inactivity period of 90 days.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-21-2004, 06:29 PM
Darkwaters
Hill Giant
 
Join Date: Aug 2004
Location: Michigan
Posts: 118
Default Your wireless router is all this post pertains too

Here is a portion of the tech support stating some info on setting up your wireless just for confirmation that you've done something similar for your EQEmu config on the router.

Quote:
Q: I setup an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do?
A: If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. If you want to use the UT Server Admin, forward another port (8080 usually works well), then in the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and ServerName to the IP assigned to the Router from your ISP.

Q: How do I get Half-Life: Team Fortress to Work with the Wireless AP + Cable/DSL Router?
A: The default client port for Half-Life is 27005. The computers on your LAN need to have "+clientport 2700x" to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server. One problem: version 1.0.1.6 won't let multiple computers with the same CD key connect at the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does not need to be in the DMZ. Just forward port 27015 or 27016 to the local IP of the server computer. There remains, however, a problem with people being booted after a few minutes with an "illegible server message."
Notice
Quote:
As far as hosting games, the HL server does not need to be in the DMZ. Just forward port 27015 or 27016 to the local IP of the server computer. There remains, however, a problem with people being booted after a few minutes with an "illegible server message."
it may or may not have a similar type thing to do with it.

Again not saying you haven't just hoping something was missed it would be nicer to find this the case then some freaky undiscoverable issue. =) Also check the router security log if its active for any additional hints.
Darkwaters
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 08:29 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3