World.exe

Doughnutz · #1 06-23-2005, 05:08 PM

Didn't figure out. Gave up. Would much rather just play EQEmu on Cheaters with Sdabbs and all the other cool peepz

fanman55 · #2 06-23-2005, 05:20 PM

Sounds like your EverQuest Client version doesn't match the EQEmulator version. There isn't much you can do other than wait until the Emulator cathes up with live. =(

Doughnutz · #3 06-23-2005, 05:33 PM

<><><><><>

mrea · #4 06-23-2005, 11:08 PM

Are you behind a firewall? Because it doesn't seem that your server is getting any data from your client.

Also, are you connecting to the same loginserver that your world.exe is?

**Doodman** · #5 06-24-2005, 04:49 AM

If you are behind a NAT firewall, this thread might help you:
http://www.eqemulator.net/forums/sho...ighlight=trick

RangerDown · #6 06-24-2005, 06:53 AM

The fact world.exe doesn't say anything about a "new connection" coming in leads me to believe that yes, you have a hardware or software firewall that's blocking that, or the NAT situation that Doodman referred to.

This is why I had you post on forums. I just now getting to read this due to a power outage (that I'll be posting about shortly to give you all a laugh, stand by), but I see other very qualified people have already answered

Doughnutz · #7 06-24-2005, 02:59 PM

<><><><><>

Doughnutz · #8 06-24-2005, 03:01 PM

By the way, I am tryign to host a public server not MiniLogin

Doughnutz · #9 06-24-2005, 03:03 PM

~~~~~~~~~~~~~~~~~

Sarepean · #10 06-24-2005, 10:39 PM

Try setting your world address to your external IP address and not 127.0.0.1

I use a Linksys router and can host a server with only DMZ turned on, so I think you should be pretty much covered as far as being able to get in and out. =P It's gotta be something with settings or versions.

EDIT:: Oh, and your eqhost.txt should be going to 5994 and not 5999.