Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Linux Servers
Reload this Page Need help getting zones up

Support::Linux Servers Support forum for Linux EQEMu users.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-15-2006, 01:34 PM
Armanthuz
Sarnak
  
Join Date: Apr 2003
Posts: 72
Default Need help getting zones up
i can get world up no problem, and can log into it and make characters. I cant get zones to work at all thou. Any suggestions?

copy and paste of zone boot up attempt

penguin:/storage/eqserver # ./zone armserver.no-ip.org commons 7790 localhost
[Status] Starting Log: logs/eqemu_zone.log
[Status] Using database 'eqemu' at localhost
[Status] CURRENT_ZONE_VERSION: EQEMu 0.6.4-DR1
[Status] Loading opcodes..
[Status] Log settings loaded from ./log.ini
[Status] Mapping Incoming Opcodes
[Status] Loading Variables
[Status] Loading zone names
[Status] Loading items
[Status] libEMuShareMem.so loaded
[Status] Loading npcs
[Status] Loading npc faction lists
[Status] libEMuShareMem.so loaded
[Status] Loading loot tables
[Status] libEMuShareMem.so loaded
[Status] Loading guilds
[Status] Loading guild list
[Status] libEMuShareMem.so loaded
[Status] Loading factions
[Status] Loading titles
[Status] Loading AA effects
[Status] Loading swarm spells
[Status] Loading tributes
[Status] Loading corpse timers
[Status] Loading what ever is left
[Status] Loading commands
[Debug] Starting Log: logs/eqemu_debug_zone.log
[Debug] command_init(): - Command 'appearance' set to access level 150.
[Debug] command_init(): - Command 'attack' set to access level 150.
[Debug] command_init(): - Command 'cast' set to access level 20.
[Debug] command_init(): - Command 'castspell' set to access level 20.
[Debug] command_init(): - Command 'chat' set to access level 200.
[Debug] command_init(): - Command 'copychar' set to access level 200.
[Debug] command_init(): - Command 'crashtest' set to access level 201.
[Debug] command_init(): - Command 'damage' set to access level 100.
[Debug] command_init(): - Command 'date' set to access level 80.
[Debug] command_init(): - Command 'dbspawn2' set to access level 200.
[Debug] command_init(): - Command 'delacct' set to access level 200.
[Debug] command_init(): - Command 'depop' set to access level 100.
[Debug] command_init(): - Command 'depopzone' set to access level 100.
[Debug] command_init(): - Command 'emote' set to access level 80.
[Debug] command_init(): - Command 'finditem' set to access level 0.
[Debug] command_init(): - Command 'findspell' set to access level 20.
[Debug] command_init(): - Command 'flymode' set to access level 20.
[Debug] command_init(): - Command 'freeze' set to access level 100.
[Debug] command_init(): - Command 'gender' set to access level 10.
[Debug] command_init(): - Command 'gm' set to access level 100.
[Debug] command_init(): - Command 'gmspeed' set to access level 100.
[Debug] command_init(): - Command 'haste' set to access level 100.
[Debug] command_init(): - Command 'heal' set to access level 10.
[Debug] command_init(): - Command 'hideme' set to access level 80.
[Debug] command_init(): - Command 'invul' set to access level 80.
[Debug] command_init(): - Command 'invulnerable' set to access level 80.
[Debug] command_init(): - Command 'itemsearch' set to access level 0.
[Debug] command_init(): - Command 'kick' set to access level 150.
[Debug] command_init(): - Command 'kill' set to access level 100.
[Debug] command_init(): - Command 'level' set to access level 10.
[Debug] command_init(): - Command 'listnpcs' set to access level 100.
[Debug] command_init(): - Command 'lock' set to access level 150.
[Debug] command_init(): - Command 'makepet' set to access level 20.
[Debug] command_init(): - Command 'mana' set to access level 10.
[Debug] command_init(): - Command 'memspell' set to access level 100.
[Debug] command_init(): - Command 'motd' set to access level 150.
[Debug] command_init(): - Command 'movechar' set to access level 100.
[Debug] command_init(): - Command 'npccast' set to access level 80.
[Debug] command_init(): - Command 'npcloot' set to access level 80.
[Debug] command_init(): - Command 'npcspecialattk' set to access level 100.
[Debug] command_init(): - Command 'npcstats' set to access level 80.
[Debug] command_init(): - Command 'npctypespawn' set to access level 10.
[Debug] command_init(): - Command 'nukebuffs' set to access level 100.
[Debug] command_init(): - Command 'permaclass' set to access level 80.
[Debug] command_init(): - Command 'permagender' set to access level 80.
[Debug] command_init(): - Command 'permarace' set to access level 80.
[Debug] command_init(): - Command 'pvp' set to access level 100.
[Debug] command_init(): - Command 'race' set to access level 20.
[Debug] command_init(): - Command 'repop' set to access level 100.
[Debug] command_init(): - Command 'save' set to access level 100.
[Debug] command_init(): - Command 'search' set to access level 0.
[Debug] command_init(): - Command 'sendzonespawns' set to access level 200.
[Debug] command_init(): - Command 'serverinfo' set to access level 201.
[Debug] command_init(): - Command 'setaapts' set to access level 100.
[Debug] command_init(): - Command 'setaaxp' set to access level 100.
[Debug] command_init(): - Command 'setallskill' set to access level 20.
[Debug] command_init(): - Command 'setskill' set to access level 20.
[Debug] command_init(): - Command 'setskillall' set to access level 20.
[Debug] command_init(): - Command 'setxp' set to access level 100.
[Debug] command_init(): - Command 'showbuffs' set to access level 100.
[Debug] command_init(): - Command 'showpetspell' set to access level 250.
[Debug] command_init(): - Command 'shutdown' set to access level 200.
[Debug] command_init(): - Command 'size' set to access level 80.
[Debug] command_init(): - Command 'spawn' set to access level 10.
[Debug] command_init(): - Command 'spawnstatus' set to access level 100.
[Debug] command_init(): - Command 'spfind' set to access level 20.
[Debug] command_init(): - Command 'summon' set to access level 100.
[Debug] command_init(): - Command 'summonitem' set to access level 0.
[Debug] command_init(): - Command 'texture' set to access level 10.
[Debug] command_init(): - Command 'title' set to access level 100.
[Debug] command_init(): - Command 'unfreeze' set to access level 100.
[Debug] command_init(): - Command 'unlock' set to access level 150.
[Debug] command_init(): - Command 'weather' set to access level 80.
[Debug] command_init(): - Command 'worldshutdown' set to access level 200.
[Debug] command_init(): - Command 'zclip' set to access level 80.
[Debug] command_init(): - Command 'zcolor' set to access level 80.
[Debug] command_init(): - Command 'zheader' set to access level 80.
[Debug] command_init(): - Command 'zone' set to access level 10.
[Debug] command_init(): - Command 'zonebootup' set to access level 150.
[Debug] command_init(): - Command 'zoneshutdown' set to access level 150.
[Debug] command_init(): - Command 'zsafecoords' set to access level 100.
[Debug] command_init(): - Command 'zsave' set to access level 200.
[Debug] command_init(): - Command 'zsky' set to access level 80.
[Debug] command_init(): - Command 'zstats' set to access level 80.
[Debug] command_init(): - Command 'zuwcoords' set to access level 100.
[Status] 181 commands loaded
[Status] Loading embedded perl XS
[Status] Loading quests
[Quest] Starting Log: logs/eqemu_quest_zone.log
[Quest] Tying perl output to eqemu logs
[Quest] Creating EQEmuIO=HASH(0x83a063
[Quest] Creating EQEmuIO=HASH(0x8394fe
[Quest] Loading perlemb plugins.
[Quest] Loading perl commands...
[Status] Starting EQ Network server.
[Error] Starting Log: logs/eqemu_error_zone.log
[Error] Zone bootup FAILED!
Connected to worldserver: localhost:9000


The zone_error_log siomply says...

---------------------------------------------
17156 [02.15. - 19:23:05] Starting Log: logs/eqemu_error_zone.log
17156 [02.15. - 19:23:05] Zone bootup FAILED!


Any ideas on what i did wrong??
Reply With Quote
  #2  
Old 02-16-2006, 01:38 AM
Belfedia
Demi-God
  
Join Date: Jan 2005
Posts: 1,109
Default
Wrong use about zone command:

Type
./zone [nameofzone or "." for dynamic zone ] [ExternalAdress] [port] [InternalAdress or localhost]

don't forget add & for make it daemon.

example for you :

./zone commons armserver.no-ip.org 7790 localhost & (for static commons zone)
./zone . armserver.no-ip.org 7790 localhost & (for dynamic zone)


A linux Boot5zones script (don't forget to chmod it)

Code:
#!/bin/sh
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:.
./zone . armserver.no-ip.org 7990 localhost &
./zone . armserver.no-ip.org 7991 localhost &
./zone . armserver.no-ip.org 7992 localhost &
./zone . armserver.no-ip.org 7993 localhost &
./zone . armserver.no-ip.org 7994 localhost &
when you type
./boot5zones
you start 5 dynamics zones servers
__________________
__________________________________________________ _____________________________________
I speak english like a spanish cow..., I speak spanish like a english pudding...
But I try to speak good french !!! (Non au langage SMS sur forum)
http://eqfroggy.new.fr : Froggy French Server Website.
Last edited by Belfedia; 02-16-2006 at 09:51 AM..
Reply With Quote
  #3  
Old 02-16-2006, 03:00 AM
Armanthuz
Sarnak
  
Join Date: Apr 2003
Posts: 72
Default
Thank you, that worked very well!
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

   

All times are GMT -4. The time now is 11:28 AM.

EQEmulator - Archive - Top

 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3