Issue with private lan server.

[Kingmen30264]

My modem is a westell e90-610014-16 and my router (Should it be beneficial to know) is a Belkin G Wireless F5D7234-4 V5. Hope this is all the information you will need

(Thank you for helping me btw )

[joligario]

Found a walkthru at http://mysite.ncnetwork.net/res08lyg/6100.htm

[Kingmen30264]

It worked.... sorta. I am having to use my router as the "modem" for the minute as to not change anything that I did to the actual modem. I followed everything it told me to do, only I cannot access my modem any longer through the designated IP (192.168.1.1).

I have a Belkin G Router, how do I "clone the mac address"?

[joligario]

If you're on the internet, then your ISP doesn't need you to clone the MAC address. Putting it in bridged mode basically makes it pass right through so you won't need to access your modem anyways.

[Kingmen30264]

Server Update:

IT WORKS!!!!!!!!!!!!

Only issue (I seem to have a lot of these =( ) Is that only ONE person can log onto my server at ANY given time. Here is a post of what my logs say:

[08.05. - 23:27:01] [WORLD__CLIENT] New connection from xx.xx.xxx.xxx:58068
[08.05. - 23:27:02] [NET__ERROR]xx.xx.xxx.xxx:58068: Received OP_SessionRequest in ESTABLISHED state (0)
[08.05. - 23:27:02] [NET__IDENTIFY] Unable to identify stream from xx.xx.xxx.xxx:58068 before it closed.
[08.05. - 23:27:02] [NET__IDENTIFY] Stream state was Closed

Now I am not sure what is causing this, but when ONE client tries to log in, it works just fine, but when a second client tries to log in, it keeps repeating this error.

I have all my ports up and running in all my firewalls, I just need to know how to allow more users.



Thanks again to all those that have helped me come this far, and thanks to those that will help me in the future.

[Kingmen30264]

Originally Posted by luluxiu

Files contained in EQEmuLoginServer.rar the proper use, will make you experience you correct the error. Download and install HeidiSQL let you see only a command prompt, rather than manipulate it can see the SQL table...

Say... Huh? I don't understand anything in this post that you just posted. Could you try elaborating a tad... please?

I installed everything in the server folder correctly, so I am not sure why it is not letting me allow more than one person at any given time to log onto my server, and then if they DO succeed in logging in, if they zone it crashes them and then they can't log on.