eq patch?

[caravelle]

could the most current EQ patch cause compatability issues with trying to login to emu servers? or your own on mini login?

[Lurker_005]

I am pretty sure the latest patche broke loging into EQEmu I don't patch unless a new EQEmu is released :)

[caravelle]

oh, so thats why i cant login grr

[Shawn319]

latest patch works fine.

[caravelle]

I can login to other peoples servers fine, when I try and host my own, it sppears on the list, but when I try and log in it gives me the (you must re run everquest patch - 1017 error)

---eqhost---

[Registration Servers]
{
"eqlogin.eqemu.org:5999"
}
[Login Servers]
{
"eqlogin.eqemu.org:5999"
}

---END---


---Boot5zones.bat---

REM:--------------Start-----------------------


@echo off
start zoneNT . 63.228.50.206 7995 127.0.0.1
start zoneNT . 63.228.50.206 7996 127.0.0.1
start zoneNT . 63.228.50.206 7997 127.0.0.1
start zoneNT . 63.228.50.206 7998 127.0.0.1
start zoneNT . 63.228.50.206 7999 127.0.0.1
exit
cls


REM:---------------END------------------------



---Loginserver.ini---

[LoginServer]
loginserver=eqlogin.eqemu.org
worldname=sharky
locked=false
account=
password=
worldaddress=63.228.50.206
loginport=5999

---END---



---db.ini---

[Database]
host=localhost
user=caravelle
password=*****
database=eq

---end---


*Both my World.exe and Zonebat.exe run error free, im on windows XP.
ive been trying to get this to work for a few days now so im kinda tired out, any help would be great.

[meliudaj]

make sure to read and try all the 1017 windows xp stuff on this board...

also 63.228.xxx.xxx??? You on Quest DSL? If so what modem do you have... If you have cisco 675-678 it most likely is an issue with your NAT table as it was on mine.

If everything in that last paragraph confused you... I can't help. If it made alot of sence.. I may be able to help you on that side of it.
P.S. Last EQ patch did not effect the functionality of eqemu any.

[caravelle]

yes yes! I have sisco 678 and am with Qwest DSL, did you get yours to work by messing around with it? and if so, what do I have to do?

[meliudaj]

First off, please specificaly address each point of my post.

Second you must be near SF, SD. Am I right? Reason being is that is the same ip set I get in time to time for my WAN address. 63.228.xxx.xxx

[caravelle]

Im Minnesota, Minneapolis

Ive tried alot of the 1017 error fixes on the boards, but none work for me, whatever I do It always gives me the 1017 error when I try and host a server and log into it.

-- sorry that i didnt respond to each one of your points

[meliudaj]

First off all your *.ini's and *.bat's look fine.
/em applaud

Your at least far enough ahead of the rest that I'll try and help you out.

Second read THIS (http://www.eqemu.net/forums/showthread.php?s=&threadid=1615) post.... whether or not your realize it.. your question is answered here.

Next after this is going to take a little work do to we are going to have to make config changes in your router.. also I will have to explain exactly what we are doing as. The config changes we make in your router have a good chance of breaking as soon as your IP changes.

Please say your a computer tech....?????

[caravelle]

unfortunatlly I am not a computer tech, I am better with computers than most though.

I went into LAN options in control panel and set firewall for off, I read in the other thread that 9000, AND 7999-7995 all MUST be open on your firewall, does turning off firewall in my LAN options do this for me?

[meliudaj]

That is important yes... but not what is causing your problems.

Your problem is occurring before WINxp's fire wall an even get its hand on the data...

short lesson:

NAT = Network Address Translation.

What NAT does... it allows you to have one real IP (your 63.228.xxx.xxx) for many None real IP's (all your PC's you have running at home on your "guessing" 192.168.0.0 network.) FYI 192.168.0.0 is a private address.. No router will pass that address. But that isn't a bad thing.
This isn't so un-similar to the concept behind routing.

Here inlays the problem.
For ease sakes. Lets say this. You have 2 puters in your lan. Your eqemu server has an ip address of 192.168.0.2 and your Ever Quest playing computer (or client I will call it) has an ip address of 192.168.0.3. Also lets say your Cisco 678

[ssfourgoku]

:( /cry if only someone knew about DI-804 routers i would have a server up n running!

[EmuSharky]

Hey Mell - Im on a cisco 675, same problem I believe. I followed your instructions, but heres what my show nat is telling me now.
I placed the x's there to protect my IP:

Inside Local Inside Global Timer Flags Protocol
192.168.0.2: 9000 63.228.xx.xxx: 9000 30 0x2041 ***
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2:*****63.228.xx.xxx:***** 0 0x3041 ***
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 7990 63.228.xx.xxx: 7990 0 0x41 tcp
192.168.0.2: 7991 63.228.xx.xxx: 7991 0 0x41 tcp
192.168.0.2: 7992 63.228.xx.xxx: 7992 0 0x41 tcp
192.168.0.2: 7993 63.228.xx.xxx: 7993 0 0x2041 ***
192.168.0.2: 7994 63.228.xx.xxx: 7994 0 0x2041 ***
192.168.0.2: 7995 63.228.xx.xxx: 7995 0 0x2041 ***
192.168.0.2: 7996 63.228.xx.xxx: 7996 0 0x2041 ***
192.168.0.2: 7997 63.228.xx.xxx: 7997 0 0x2041 ***
192.168.0.2: 7998 63.228.xx.xxx: 7998 0 0x2041 ***
192.168.0.2: 7999 63.228.xx.xxx: 7999 0 0x2041 ***
--------------------------------

This part happened after the Boot5Zones, once I went back into telnet:

10.0.0.2: 1124 63.228.xx.xxx:20507 30 0x66 tcp
10.0.0.2: 1143 63.228.xx.xxx:20515 30 0x46 udp
10.0.0.2: 1145 63.228.xx.xxx:20516 90 0x46 udp
10.0.0.2: 5999 63.228.xx.xxx: 5999 30 0x46 icmp

-----------------------------------------------------------------------------------

Please let me know what I need to do in order to fix the problem (if you can help).
Or if anyone else has an answer for this, let me know!

Thanks.
-Sharky

[meliudaj]

So far it looks like your headed in the right direction... But do this for me... Telnet into your router after a long period of NO internet activity (90 + seconds) and do a show NAT.
Post that here. So I can see what your blank NAT looks like. It should have these new static NAT entries in there if all is well... But looking at what you posted, a few things worry me. Mainly these four lines:

192.168.0.2: 9000 63.228.xx.xxx: 9000 30 0x2041 ***
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2:*****63.228.xx.xxx:***** 0 0x3041 ***


I'm worried you accidently put the same thing in too many times.. plus you stumbled accross that last one... Well the last one just aint right! :-)

Either way if that is the case.. No biggy we can just blow them ALL out and I will just cut and Paste exactly what you need to input.

P.S. How is you eqemu failing at this point exactly?

[Shortlived]

caravelle, I hope you get your server up and running! but as you just told everyone your Mysql Password you might want to think about changing it =P

[EmuSharky]

Mel - heres my Telnet stuff after 90+ secs of NO internet activity. The problem I'm having is when people / or myself try to connect to my server (Only on the live server list) It tells me that I need to rerun the patch. EQEMU works fine for me (just playing alone on localhost - or atleast it did before this NAT stuff - I havent tested it since, but I'm going to assume that it will still work fine on the localhost.) The only problem that I'm having is, as I stated before, on the live servers it wont let me connect.
Thanks. Let me know if you have any ideas:


192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x2041 ***
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2:*****63.228.xx.xxx:***** 0 0x3041 ***
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 9000 63.228.xx.xxx: 9000 0 0x41 tcp
192.168.0.2: 7990 63.228.xx.xxx: 7990 0 0x41 tcp
192.168.0.2: 7991 63.228.xx.xxx: 7991 0 0x41 tcp
192.168.0.2: 7992 63.228.xx.xxx: 7992 0 0x41 tcp
192.168.0.2: 7993 63.228.xx.xxx: 7993 0 0x2041 ***
192.168.0.2: 7994 63.228.xx.xxx: 7994 0 0x2041 ***
192.168.0.2: 7995 63.228.xx.xxx: 7995 0 0x2041 ***
192.168.0.2: 7996 63.228.xx.xxx: 7996 0 0x2041 ***
192.168.0.2: 7997 63.228.xx.xxx: 7997 0 0x2041 ***
192.168.0.2: 7998 63.228.xx.xxx: 7998 0 0x2041 ***
192.168.0.2: 7999 63.228.xx.xxx: 7999 0 0x2041 ***

[caravelle]

this is my show nat, Me and sharky are getting stuck on the 1017 error (need to rerun patch)

vip2 Outside

Local IP : Port Global IP : Port Timer Flags Proto Interface
192.168.0.2:9000 *****:9000 0 0x00041 tcp eth0
192.168.0.2:7990 63.228.50.206:7990 0 0x10041 tcp eth0 wan0-
0
-7999 -7999
192.168.0.2:7990 *****:7990 0 0x02041 *** eth0
192.168.0.2:7991 *****:7991 0 0x02041 *** eth0
192.168.0.2:7992 *****:7992 0 0x02041 *** eth0
192.168.0.2:7993 *****:7993 0 0x02041 *** eth0
192.168.0.2:7994 *****:7994 0 0x02041 *** eth0
192.168.0.2:7995 *****:7995 0 0x02041 *** eth0
192.168.0.2:7996 *****:7996 0 0x02041 *** eth0
192.168.0.2:7997 *****:7997 0 0x02041 *** eth0
192.168.0.2:7998 *****:7998 0 0x02041 *** eth0
192.168.0.2:7999 *****:7999 0 0x02041 *** eth0
10.0.0.2:2066 63.228.50.206:31903 120 0x00046 udp eth0 wan0-
0
10.0.0.2:1110 63.228.50.206:31904 86400 0x00046 tcp eth0 wan0-
0
10.0.0.1:23 63.228.50.206:23 86400 0x0004A tcp eth0 wan0-
0

[meliudaj]

caravelle:

Local IP : Port Global IP : Port Timer Flags Proto Interface
192.168.0.2:9000 *****:9000 0 0x00041 tcp eth0
192.168.0.2:7990 63.228.50.206:7990 0 0x10041 tcp eth0 wan0-
0
-7999 -7999 <-- /em scratches head
192.168.0.2:7990 *****:7990 0 0x02041 *** eth0
192.168.0.2:7991 *****:7991 0 0x02041 *** eth0
192.168.0.2:7992 *****:7992 0 0x02041 *** eth0
192.168.0.2:7993 *****:7993 0 0x02041 *** eth0
192.168.0.2:7994 *****:7994 0 0x02041 *** eth0
192.168.0.2:7995 *****:7995 0 0x02041 *** eth0
192.168.0.2:7996 *****:7996 0 0x02041 *** eth0
192.168.0.2:7997 *****:7997 0 0x02041 *** eth0
192.168.0.2:7998 *****:7998 0 0x02041 *** eth0
192.168.0.2:7999 *****:7999 0 0x02041 *** eth0
10.0.0.2:2066 63.228.50.206:31903 120 0x00046 udp eth0 wan0-
0 <-- /em sings One of these things aint like the other... one of these things aint quite the same.
10.0.0.2:1110 63.228.50.206:31904 86400 0x00046 tcp eth0 wan0-
0
10.0.0.1:23 63.228.50.206:23 86400 0x0004A tcp eth0 wan0-
0

First read the new sticky note on this topic.. as I kinda fine tuned the instructions at the bottom of my story. (main diff is not have ing you try the 7990-7999 attempt).

Second... I read threw this show nat.. Hmm not too bad should still work then BOOM wtf???? 10.0.0.2??? Silly Caravelle, I think you followed my doc a little WAY too close, as I beleive your PC's are on a 10.0.0.0 Network.. not a 192.168.0.0 Network.
What is the IP of the PC that is running your server? (guessing 10.0.0.1 or 10.0.0.2) If this is the case you will need to re-add those NAT entries.. but replace 192.168.0.2 with your eqemu servers IP.

But first you will want to blow away all those bogus entries you just created.
cbos#set nat entry delete inside 192.168.0.2
That should take care of those. And remember... read the sticky version of my doc as I made that small change.

Luck or no luck please still cut/paste your show nat here. Also.. remember your cbos#write mem

[meliudaj]

EmuSharky:

LOL... sorry too funny.

Read what I just told caravelle! But replace all instences of Caravelle with the word "EmuSharky" :-)

It looks like you 2 did EXACTLY the same wrong thing.

[EmuSharky]

Lol,
Man oh man... My power was down yesterday; but now I found that my IP changed :) (Yay!). It seems that I was on a 10.0.0.2 network (lol, dont ask, I followed ur instructions!! /grin). It appears to be displaying the proper 63.xxx.xx.xxx IP now when I use telnet (ie - I can access my telnet thru my OUTSIDE IP now, not the 10.0.0.2 like it used to be doing).

I'll let ya know if this works once I return from my job.

Thanks :)
-Sharky