PDA

View Full Version : surface_blit

delvecieo
03-16-2002, 07:50 AM
I was given the new emu a try out using the minilogin. I ran

1)minilogin.exe

2) Run World.exe

3) Run Boot5Zones.bat

4)eqw

and every thing checked out ok then I got this message

surface_blit:Blit failed code 88760082! x, y = (0, 0) src(0, 0, 640, 480)

after I try connecting with eqw... What does it mean?:confused:
Lurker_005
03-16-2002, 08:33 AM
2.5 was released today, try that,

Edit: wasn't thinking straight, sorry I couldn't help.
delvecieo
03-16-2002, 09:08 AM
It is version 2.5 and I followed the instruction that came with it. :confused:
Shawn319
03-16-2002, 11:22 AM
is your desktop set to 16 bit color?
delvecieo
03-16-2002, 01:00 PM
yeah, any other ideas?
tcsmyworld
03-16-2002, 03:29 PM
Possible corrupted EQ or database file?
Shawn319
03-16-2002, 04:55 PM
try doing a complete file check when patching (advanced options)
Ryozu
03-17-2002, 05:10 PM
You have to be set to 16 bits per pixel in 3 places. 1, Desktop color depth.. 2, EQW.INI and 3, VideoModeBitsPerPixel in EQclient.ini

If any of those 3 are not set to 16, then you may have problems.. Actually, I'm not sure there is a setting in EQW.ini, but it doesn't hurt to check.