Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Windows Servers

Support::Windows Servers Support forum for Windows EQEMu users.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 03-11-2010, 05:57 PM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

If you are connecting your server to the Public Login Server, then your config here is probably the cause of your issues:

Code:
<!-- Only specify these two things if you really think you need to -->
<address>192.168.1.34</address>
<localaddress>192.168.1.34</localaddress>
Note that "Only specify these two things if you really think you need to" basically means "don't set these". :P

Try replacing that with this:
Code:
<!-- Only specify these two things if you really think you need to -->
<!-- <address>192.168.1.34</address> -->
<!-- <localaddress>192.168.1.34</localaddress> -->
That will comment those lines back out so they aren't used. See if that helps.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 12:26 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3