Boot5zones.Win9x errors

[wycked]

Been racking my brain on this one and after reading the readme to the letter and applying a few fixes here and there i got the world.exe to work fine but i'm haveing problems with Boot5Zones.Win9x getting this error when running it

Cannot find file Zone9x (or one of it's components). check to ensure that the path and the filename are correct and that all required libraries are avalable.

Boot5Zones.Win9x is as follows

REM:--------------Start-----------------------


@echo off
start zone9x . 4.61.182.43 7995 127.0.0.1
start zone9x . 4.61.182.43 7996 127.0.0.1
start zone9x . 4.61.182.43 7997 127.0.0.1
start zone9x . 4.61.182.43 7998 127.0.0.1
start zone9x . 4.61.182.43 7999 127.0.0.1
exit
cls


REM:---------------END------------------------

any help would be very appriciated

Wycked

[Shawn319]

Zone9x.exe comes in the zip file for emu. try re-extracting it (and double checking all your ini and batfile setups)

[wycked]

After playing eq for while it poped in my head "try putting in the path"
ok so now i'm not getting errors but when the zone window pops up it closes immedately i passed this up with world.exe by starting it from a dos window instead of clicking the program icon
any idea on getting the windows to stop closeing?

[Shawn319]

Well if you run the bat file from a commandline it will tell you the errors.

[Lurker_005]

Also if your running the boot5zones.win9x.bat from the same location as zone9x.exe you don't need to have it in the path.

Everything in the emu zip should have been unziped into the same directory. Any other way isn't supported, and you get to figure it out on your own for the most part.