Huge zone times and frequent disconnects.

[EQEmu102]

I have the zoneperl from jimothy but I thought it wasnt 100% stable. just thought there might be a newer one =) thanks

As to my opcode problem.. I'd really lvoe to get an opcode file from someone running a stable 6.2 server. I inserted the 0 opcodes to stop alot of the spam but I still get:

Minilogin.exe console:

654156 New client from ip:XX.xx.xx.xx port: xxx
Unkown packet: .4233692 [92.153.64.0:15-> 0.0.0.0:0]
[OpCode 0x0003 <Op_Unkown> size=11]
00000: 00 06 00 00 00 00 00 00 - 00 00 00

However I can usually log in so thats not a huge concern..
Next is the World exe console when a user logs in:
Logged in: xxxxxxxxxxxxx
Recieved unkown OpCode: 0x0107 size: 0 bytes

However it still allows me to go to char selection usually.

Now when I try to login to a slected char I get world.exe console showing this:

... standard zone setup stuff here.....
then.
Zone Port=8784
Client disconnected
Removing client from ipx.xx.xx.xx port: xx
Zoneserver Setzone xx.xx.xx.xx:portx

This part concerns me as it looks like world.exe may actually be dorpping my client? Or is it dropping my client because it is now passed the client to zoneperl.exe?

Now when I do sometimes get zoned in I get zoneperl doing this:

[error] Unhandled incoming OpCode: Op_AnoyingZoneUnkown (@299, eq=0x0000) size:8, client: (clientnamehere)
0: 79 00 00 00 40 00 00 00
Dropping client: process: false, IP= xx.xx.xx.xx port: xxxx
[status] zone shutdown


Thanks for any insite folks.

[EQEmu102]

As per my earlier post Sdabbs its not the PC

My server is a P4 2.4 with 512 Ram and I'm only triyng to run 1 zone at a time =) I'm usinag a grand total of 300 MBs of memory with O/S overhead included.

My client PC is a P4 2.6 Gig with 1gig Ram and a 256 MB ATI 9600 Pro..

Not my PCs

Thanks for the info on your probs though. maybe its memory handling... I'm running the server on XPPro O/S is that bad?

[Belfedia]

Dohhh we need one more compil from last CVS source !!!
Have you try Cavedude version from dark rogue production pack 2.0 ?

[EQEmu102]

I have not Belf.. Which EXE is it you think I've got an old ver of? the World or Zoneperl?

I'll check cavedudes stuff. I know I have it DLd.

Thanks again

[Belfedia]

I know cavedude make is exe for zone and world. Perhaps is work is less bug than the jimm0thy fix ?

[EQEmu102]

Thanks Belf. Let me put fixed zone.exe back and do some testing when I get home.

Does questing work with just zone.exe? Dont you need to use zoneperl.exe to get quests to work?

merci

Edit for clarity:
The world and zone EXE I am currently using are part of Mikey's fixed pack. The zoneperl.exe I tried to use is from Jimmys fix for zonePerl.exe

I was hoping to run quests so I do need a working zoneperl correct?

Thanks

[EQEmu102]

Good Catch Belfedia. Was the zoneperl.exe

I got the updated one from one of the downloads.. Thanks. Zoning much better now. No disconnects. Still an issue with overall zone times but nothing like I was experiencing before.

*cheers wildly*

Thanks again

[Dr Zauis]

Originally Posted by EQEmu102

Thanks Belf. Let me put fixed zone.exe back and do some testing when I get home.

Does questing work with just zone.exe? Dont you need to use zoneperl.exe to get quests to work?

merci

Edit for clarity:
The world and zone EXE I am currently using are part of Mikey's fixed pack. The zoneperl.exe I tried to use is from Jimmys fix for zonePerl.exe

I was hoping to run quests so I do need a working zoneperl correct?

Thanks

Just the zone.exe in the sp-2 loads quests! It may or may not be as complete as zoneperl.exe but it dont crash..Im trying to figure out how to compile a version of zone.exe like that. From the project I can only compile the zone.exe without quests.

[Damilis]

Originally Posted by EQEmu102

As per my earlier post Sdabbs its not the PC

My server is a P4 2.4 with 512 Ram and I'm only triyng to run 1 zone at a time =) I'm usinag a grand total of 300 MBs of memory with O/S overhead included.

Only 1 Zone.exe? I have always had really good luck running >=2 zone.exes.

Reasoning: Zone.exe A has you in ecommons and you want to zone to freportw

With 1 Zone.exe running:
1) you are removed form zone.exe A
2) Zone.exe A shuts down ecommons
3) Zone.exe A boots up freportw
4) Then you are inserted into freportw

aka the process is all happening in series.


With 2 Zone.exe's running:
1) Zone.exe B boots up freportw while you are still in ecommons
2) You are transferred to freportw once its done booting
3) Once you are out of ecommons, Zone.exe A shuts down while you are already in freportw

aka the process is happening mostly in parallel and the only waiting you have is for 1) Zone.exe B to boot up freportw and 2) your client load time.

[EQEmu102]

Not really sure where I confused you Dam but I am running the Zone5bat proicess I simply am only using 1 zone at a time because I am the only one on the servers...

As I stated in my last post the entire problem was the zoneperl.exe

I had an older one and the latest one fixed it (from 9/23 or 9/28 or something I think.)

Thanks for your advice though

[Damilis]

Okies, you made it sound like you were only running one instance of Zone.exe, which would cause bad zone times. my bad.