EQemu launch problem

[CamelFilter]

I think your problem is to make sure that you go back to the mysql command step and redo it. If when you use MySQLCC and cannot open your DB this is usually the prob. Lots of people, inclusing myself forget to give ourselves access to the db.

The server is unlocked by default. So unless you make it change in the config.xml I doubt you changed it. Ermmm locked servers mean that the world and zone launchers are still loading. So nobody can enter.

[Gamist]

This is all that my eqlauncher says when the window pops up:

[Debug] Starting Log: logs/eqemu_debug_0692.log
[Debug] [LAUNCHER_INIT] Loading server configuration . .

It Never goes any farther than that. Could this be the problem?

[CamelFilter]

For the Locked thing you have seen on the server select yes, but did you do that check I asked you to look at? If you followed the 7.0 tutorial you should have MySQLCC and try to open that database.

[Gamist]

I did everything correct with MySQLCC.
I went into "databases", "peq", "tables", and double-clicked on "account" and then I inserted under "name" player, and than tabbed over to "password" and put in eq, and tabbed over to "status" and put in 250, and then I finally tabbed over to "minilogin_ip" and put in 127.0.0.1

Then thats all it says to do.

[Gamist]

I think my problem lies within the file "eqemu_config.xml". Here is what mine looks like, and i'm not sure how it's supposed to look exactly.

<?xml version="1.0">
<server>
        <world>
                <shortname>minilogin</shortname>
                <longname>My Minilogin</longname>
                
                <!-- Only specify these two if you really think you need to. -->
		<address>127.0.0.1</address>
		<localaddress>127.0.0.1</localaddress>
		
		<!-- Loginserver information. -->
        <loginserver>
		<host>127.0.0.1</host>
		<port>5999</port>
		<account></account>
		<password></password>
        </loginserver>

		<!-- Server status. -->
		<!--<locked/>-->
		<!-- <unlocked/> -->

		<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). -->
		<tcp ip="localhost" port="9000" telnet="disable"/>

                <!-- Sets the shared key used by zone/launcher to connect to world -->
                <key>some long random string</key>

                <!-- Enable and set the port for the HTTP service. -->
                <http port="9080" enabled="false" mimefile="mime.types" />
        </world>
	
	<!-- Chatserver (channels) information. -->
	<mailserver>
		<host>127.0.0.1</host>
		<port>5999</port>
	</chatserver>

	<!-- Mailserver (in-game mail) information. -->
	<mailserver>
		<host>127.0.0.1</host>
		<port>5999</port>
	</mailserver>

	<zones>
		<defaultstatus>20</defaultstatus>
	
		<!-- Sets port range for world to use to auto configure zones. -->
		<ports low="7000" high="7100"/>
	</zones>

        <!-- Database configuration, replaces db.ini. -->
        <database>
                <host>localhost</host>
                <port>3306</port>
                <username>eq</username>
                <password>eq</password>
                <db>peq</db>
        </database>

	<!-- Launcher configuration. -->
	<launcher>
		<!-- <logprefix>logs/zone-</logprefix> -->
		<!-- <logsuffix>.log</logsuffix> -->
		<!-- <exe>zone.exe or ./zone</exe> -->
		<!-- <timers restart="10000" reterminate="10000" initial="20000" interval="2000"> -->
	</launcher>
	
	<!-- File locations -->
	<files>
		<!-- <spells>spells_us.txt</spells> -->
		<!-- <opcodes>opcodes.conf</opcodes> -->
		<!-- <logsettings>log.ini</logsettings> -->
		<!-- <eqtime>eqtime.cfg</eqtime> -->
	</files>
	
	<!-- Directory Locations. -->
	<directories>
		<!-- <maps>Maps</maps> -->
		<!-- <quests>quests</quests> -->
		<!-- <plugins>plugins</plugins> -->
	</directories>

</server>

[Gamist]

Disregard above post, I believe this is the way my "eqemu_config.xml" is supposed to look, can someone please confirm this. Because even after i've done the MySQL step of the 0.7 tutorial, I still can't get "world.exe" and "eqlauncher" to fully load, most upsetting.

<?xml version="1.0">
<server>
        <world>
                <shortname>minilogin</shortname>
                <longname>My Minilogin</longname>
                
                <!-- Only specify these two if you really think you need to. -->
		<address>127.0.0.1</address>
		<localaddress>127.0.0.1</localaddress>
		
		<!-- Loginserver information.  -->
        <loginserver>
		<host>127.0.0.1</host>
		<port>5999</port>
		<account></account>
		<password></password>
        </loginserver>

                <!-- Sets the shared key used by zone/launcher to connect to world -->
                <key>some long random string</key>

                <!-- Enable and set the port for the HTTP service. -->
                <http port="9080" enabled="true" mimefile="mime.types" />
        </world>

                <!-- Database configuration, replaces db.ini. -->
        <database>
                <host>localhost</host>
                <port>3306</port>
                <username>eq</username>
                <password>eq</password>
                <db>peq</db>
        </database>
</server>

[Gamist]

On this part, am I supposed to enter this in exactly like it is written? And am I supposed to do this step, as well as the one I have to do with MySQLCC afterwards?

Finishing Touches
Now it's time to finish up the installation. You just have to run a few sql commands and you will be ready to roll. If you used the PEQ databases, Click on "Start" then "Run" and type in "C:\mysql\bin\mysql -u root peq". Now type in " GRANT ALL PRIVILEGES ON peq.* TO eq@localhost IDENTIFIED BY 'eq' WITH GRANT OPTION; " If you used cavedude's database, replace "peq" with "eq".

And after this step, I only get a message that says, "Query OK, 0 rows effected" is it supposed to say that?