Sever Connection Problems

[Aramid]

If you have cut and pasted your config file and the above ACTUALY shows what your config file is, then your problem is probably here:

address>192.168.1.101</address
localaddress>127.0.0.1</localaddress

it should look like this....

<address>192.168.1.101</address>
<localaddress>127.0.0.1</localaddress>

To add the Server lock unlock code is this:

<!-- Server status. Default is unlocked -->
<!-- <locked/> -->
<unlocked/>

The above shows the server UNLOCKED

Thios would be locked:

<!-- Server status. Default is unlocked -->
<locked/>
<! <unlocked/> -->

make sure this goes in between

<world>


</world>

Also, if your going to run a public server you will need to add your account name and password in this part of the code.

<!-- Loginserver information. -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account>Your Server account Name on EMU Login Server</account>
<password>Your Server Password on Emu Login Server</password>
</loginserver>


I know, you may have left it out of your post for obvious reasons, I just wanted to be sure you were aware of it.

[AndMetal]

Originally Posted by Aramid

Also, if your going to run a public server you will need to add your account name and password in this part of the code.

<!-- Loginserver information. -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account>Your Server account Name on EMU Login Server</account>
<password>Your Server Password on Emu Login Server</password>
</loginserver>


I know, you may have left it out of your post for obvious reasons, I just wanted to be sure you were aware of it.

That part is actually optional. By default, it will assume eqemulator.net:5998, but you don't need your account name & password. I'm sure that if you have been setup as a preferred server you do, but under normal circumstances, you don't.