Need your help for testing my server

[harddisk]

A great thanks to you for your answer Malignus !

I will try to load more static zones to see if it can resolve this problem...

Anyway... Since I run my server in compatibility mode (xp sp3 ) the load time seems to be a bit faster....

Any chance to see you logged on my server to check my router/firewall connexion are working for external pepople ???

Thanks Again !

[Derision]

When I try to connect to 'Nexus Legacy', Wireshark shows my PC sending UDP packets to 85.3.194.191 (name = 191-193.3-85.cust.bluewin.ch) on UDP port 9000, but getting no response.

You should check you have UDP/9000 forwarded on your firewall to the internal address of your server.

[harddisk]

Thanks Derision for your try

I just forwarded all required ports to my local adress Server

hope this time it will work ! ( If I can bother you for another try ... )

[Derision]

OK, Now I can get to Character select, so your UDP/9000 forwarding is working OK.

When I try to zone-in, I get no response on UDP/7004 (I think I was going to tutorialb).

You need to setup port range forwarding and forward UDP ports 7000 to 7100 (assuming your are not going to be running more than 100 zones at the same time) to your internal address.

[harddisk]

OK great I saw your Character creation.....

One question ( I'm not a genius in network...)

On my router I must set the forwarded ports twice:

Public ports and Local ports

I can set 7000-7100 for Public ports but only port 7000 for local... Is it ok ?