Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Windows Servers

Support::Windows Servers Support forum for Windows EQEMu users.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-09-2010, 02:58 AM
Rykeau
Fire Beetle
 
Join Date: Jan 2010
Posts: 27
Default

As LeftRoad mentioned, your best and easiest way to fix your problem is to put your VM on the same IP subnet as your host machine.

Place your VM on the same subnet by changing your VMnet1 and VMnet8 adapters to be on the same subnet (or enable them to use DHCP if you don't mind the IP address changing). By the sounds of it though you would want to use a static IP address though since you have somebody else remoting into your network from the outside.

What this means is you have to set your VMnet adapters to be in the "192.168.1.xxx" range where xxx is a unique number between 2 and 254. Notice below that your VMnet adapters have IP addresses of 192.168.116.1 and 192.168.142.1 and Dustin-PC has an IP address of 192.168.1.7. These will not communicate with one another unless you have some routing help because they are on different networks.

In basic terms for home use, all of your computers (and home router) should have the same first 3 octets (192.168.1.xxx) or whatever so they can communicate with one another. Dustin-PC= 192.168.1.7, VMnet1 = 192.168.1.8 and VMnet8 = 192.168.1.9. Remember that the last number can be anything between 2-254 as long as it's unique and isn't assigned to another device (I excluded 192.168.1.1 since it's typically assigned to the router and already used which is indicated below by your gateway address aka router ip address). Also remember that your subnet mask should be 255.255.255.0 for all machines and the DHCP, Default Gateway and DNS servers should also typically match Dustin-PC.

You should be able to change the VMNet adapter settings in the VMWare software on Dustin-PC.

Dustin-PC
IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, September 07, 2010 10:33:20 PM
Lease Expires . . . . . . . . . . : Thursday, September 09, 2010 10:33:20 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1

Ethernet adapter VMware Network Adapter VMnet1:

Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.116.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0

Ethernet adapter VMware Network Adapter VMnet8:

Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.142.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 09:20 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3