hi!
Well I'm almost all the way solved now. .. I did a lot of testing and found the issue to be centered around login.ini
See at work I can end up on multiple subnets depending on where I jack in.
If my login.ini was specific.
W.X.Y.Z -- the client can only connect from W.X.Y.Z
If I get less specific: W.X.Y. (notice no entry in last octet)
Then clients can be anything from W.X.Y.1-254
So, we have a big network I just went with W. (no following octects) now I can connect from anywhere inside our internal network.
so adjusting local_network = **** was the issue for me.
So when I would like to have clients access from outside the router (hosting a server) I may need to specifiy the outside router address..
Seems to me there should be a remote_network setting in the login.ini file to help us get that.
local_network = 192.168.1. (all clients on 192.168.1.1-255) - or whatever
remote_network= 77.67.58.58(madeup) allows the clients to connect from outside the router (assuming router is port forwarding)
this used to be done inside the xml ??
hope this helps others?
laxa.
|
Threaded Mode
