Lan/Wan configuration question

[foulques]

Hi all, I have worked everything out for a stand alone server with login.

I am missing a detail that I hope some one can answer or explain.


can log from Wan with this eqem_config

<shortname>Server name</shortname>
<longname>Long server name</longname>
<!-- Only specify these two if you really think you need to. -->
<address>External IP</address>
<localaddress>127.0.0.1</localaddress>
<!-- Loginserver information. -->
<loginserver>
<host>external IP</host>
<port>5999</port>
<account>account</account>
<password>pswd</password>


I can log from the Lan side with
<shortname>Server name</shortname>
<longname>Long server name</longname>
<!-- Only specify these two if you really think you need to. -->
<address>Internal IP</address>
<localaddress>127.0.0.1</localaddress>
<!-- Loginserver information. -->
<loginserver>
<host>Internal IP</host>
<port>5999</port>
<account>account</account>
<password>pswd</password>

I should be able to do both with

<shortname>Server name</shortname>
<longname>Long server name</longname>
<!-- Only specify these two if you really think you need to. -->
<address>name.dyndns.org</address>
<localaddress>127.0.0.1</localaddress>
<!-- Loginserver information. -->
<loginserver>
<host>name.dyndns.org</host>
<port>5999</port>
<account>account</account>
<password>pswd</password>



But the Lan side can not log. Port forward is working, dyndns is installed on server computer. can ping External ip from lan side. I have a static IP for external IP.

I can not find a configuration that works for both.



Host files I try inernal IP, external IP, name-dyndns, but I have not worked this out.

There was one post that said
add
internal IP name,dyndns,com

to the host file. I have tried this but I am obviously not getting the syntax correct.

thanks